Descripción
Principales Parámetros Técnicos
| 1.Weight | 8.4Kg (Included swing device) | |
| 2.Outline dimension | 430 mm x 280 mm x 290 mm | |
| 3.Driving mode | Four rims driving (Rubber rim) | |
| 4.power | DC 24V | |
| 5.Swing motor | DC24V | |
| 6.Speed | 30~~800 (mm/min)( Display by nixie tube) | |
| 7.Tracking mode | Rail | |
| 8.Range of adjusting welding torch | Up and down：40mm
Front and rear：60mm. Range of working angle：±45° Range of adjusting angle: 10° |
|
| 9.Operation function | Choose walk direction | Left and right |
| Swing speed | 0～100 | |
| Swing angle | ±15° | |
| Adjust walk speed | 0～130cm/min | |
| Length of stay on left or right | 0～2.5 s | |
| Set position of deviation | 0～±8° | |
| 10.Choose swing model | ||
soldadura parámetros técnicos
| welding wire diameter
welding parameter |
Φ1.2mm | Φ1.4mm | Φ1.6mm | |
|
current（A） |
Down hand welding | 120-300 | 150-380 | 180-430 |
| flush fillet welding | 120-280 | 150-320 | 180-380 | |
| horizontal welding | 120-280 | 150-300 | 180-330 | |
| voltage（U） |
|
|||
| distance between nozzle and workpiece（H） |
|
|||
| welding extension length（L） | The length is about 10 times welding wire diameter. It is L=10d | |||
